Technical FAQ

For the technically curious

How our network works

The technical details people most often ask us about. If your question isn't here, get in touch and we'll be happy to help.

Our network

Yes. We operate our own network across multiple London data centres under our own autonomous system, AS39602. You can see our public routing and peering information on bgp.tools.

We're not able to provide traceroutes on request, as we can't make guarantees about the route taken to any individual service. Routes change over time and are partly decided by networks outside our control. As our public network information shows, we use premium suppliers throughout our network, and we're confident you'll be happy with our routing.

Connection and addressing

All connections currently use PPPoE. We expect to introduce IPoE (DHCP) in early 2027.

Your PPPoE login details are sent to you as soon as we process your order, well before your connection goes live, so you can have your router ready in advance. No VLAN tagging is required, except on SoGEA connections, which use VLAN 101.

We support a full 1500-byte MTU over PPPoE, as described in RFC 4638. To use it, your router needs to support RFC 4638 (sometimes called "baby jumbo frames", with a 1508-byte MTU on the WAN interface). Routers without this support will fall back to the standard PPPoE MTU of 1492 bytes.

Yes, IPv4 is provided through CGNAT as standard. If you need your own public IPv4 address, you can add a static IP for an additional charge when you place your order.

No. Port forwarding isn't possible on a CGNAT address, as it's shared between customers. If you need to accept incoming IPv4 connections, add a static IP to your order. Alternatively, your IPv6 allocation can be reached directly, subject to your own router's firewall.

No. We own our IP address ranges rather than leasing them, so we can be confident your static IP won't need to change.

Our IP addresses have always been allocated to the UK, so geolocation issues are rare. However, we can't guarantee that third-party geolocation databases will always be accurate.

We offer single static IPv4 addresses only, not larger blocks.

Yes. Every connection, including those using CGNAT, receives a static /48 IPv6 allocation as standard, delivered using DHCPv6 prefix delegation (DHCPv6-PD).

No. All of our IP addresses have valid, matching forward and reverse DNS records, but these can't be customised.

Yes. Our own on-net DNS resolvers are provided as standard, but you're free to use any DNS servers you prefer.

Traffic and filtering

We don't routinely block any ports. In rare cases we may need to block a port to protect you or the wider internet, for example if a vulnerable router is being exploited.

No. We don't apply traffic management, throttling, data caps or deep packet inspection to any connection.

No. Our service is unfiltered.

Performance

Unfortunately not. Our network is engineered for low latency, but most of the latency on a connection comes from the wholesale backhaul between your property and our equipment in London, which we can't influence. This varies from property to property, so we can't give a figure in advance.

No. Wholesale suppliers don't guarantee packet loss or jitter on residential connections, so we're unable to offer that guarantee to our customers. We do monitor latency, packet loss and jitter every second across every path in our core network, and we act quickly to fix anything we find.

No. Wholesale providers don't guarantee headline speeds. Where a minimum speed guarantee applies, we'll raise a fault with the supplier when appropriate. In practice, genuine speed problems are rare, and when they do happen the wholesale networks resolve them quickly. We also run our own network with plenty of spare capacity, so we're never the bottleneck.